|
Cartridges are held in place with a low temp hot melt glue. I tested several glues, this, and the white, 'school' Elmers glue were the only ones which would hold the cartridge, yet the cartridge could be removed very easily, with NO residue on the cartridge, and a slight pry with a screw driver removed the glue from the wood. No doubt in shipping, several will come loose, but could be set back into their spot once mounted on the wall. Or use a dab of the white glue.
With Board, there is a Location map, Which corresponds with list to the left. The # before the item is the location RF = Rim Fire / CF = Centre Fire
|